|
PSI carries a complete line of detention jail equipment and prison equipment to
outfit any law enforcement facility, whether for new construction or for building
upgrades. However, if you do not find exactly what you are looking for, PSI will
accommodate with custom made prison and detention equipment not found on this
website. We can make adjustments to our existing prison furniture such
as tables stools
and desks so that they better suit your needs. We can
also manufacture custom made prison equipment and detention equipment and accessories
to your exact specifications.
Woven rod doors and partitions are the kinds of jail doors PSI creates for individual law enforcement sites. Tubular-shaped frames are built of 12-gauge steel channel, and notched every two inches to receive woven rods. The cap channel has a 2 ¾”, 12-gauge steel plate and a stitch weld at 9” on center. The mesh is 3/8” in diameter, with a mild steel rod, woven at 2” on center each way, and double-crimped. Welds are placed on every other rod, where they intersect the channel frame. The frame is mounted into a 10-gauge formed steel channel expansion, anchored to the wall, and field welded to the mount channel. Woven rod jail doors and partitions are chemically degreased and coated with a rust-inhibitive primer. Additional custom options for this detention and prison equipment include a 10-gauge steel frame, ¼” woven wire at 2” on center each way, and frames or wires made of stainless steel.
Bar Grilles
PSI also makes bar grille jail doors and partitions, and access doors as standard prison and detention equipment, to secure any opening. The double-ribbed, mild steel jail bars measure 7/8” in diameter at 5” on center. Crossbars are flat, made from mild steel, and measure 3/8” by 2 ¼” at 18” on center, with punched holes for ribbed bars at 5” on center. The bar grille jail doors and partitions are finished with a chemical degreaser and one coat of a rust-inhibitive primer. Additional options include jail bar spacing at 4” on center, and flat bar spacing at 12” on center.
PSI works with architects and facilities managers to guarantee custom prison equipment and jail equipment that works. We can further customize detention windows, bar grilles, woven rods, perforated plates, HVAC grilles, and any kind of jail or prison furniture to fit any space. For more information on custom jail furniture, detention and prison equipment from PSI, call us with your specifications, at (800) 245-3172.
WOVEN ROD DOORS & PARTITIONS
| Frame: |
Tubular shaped frame to be built up of a 12 ga steel channel
1 3/4” wide x 3” high
notched every 2” to receive woven rod
Cap channel with a 2 3/4” x 12 ga steel plate & stitch weld at 9” oc. |
| Mesh: |
3/8” dia, mild steel rod, woven at 2” oc each way
double crimped
weld ever other rod where it intersects the channel frame |
| Mounting: |
Mount frame into a 10 ga formed steel channel
expansion anchored to the wall & field welded to the mount channel |
| Finish: |
Chemically degreased & coated with rust inhibitive primer |
| Options: |
10 ga steel frame, 1/4” dia woven wire at 2” oc each way
stainless steel frame & wire |
BAR GRILLE DOORS & PARTITIONS
| Bars: |
7/8” dia double ribbed jail bar, at 5” oc, mild steel |
| Cross Bars: |
3/8”x 2 1/4” mild steel flat bar at 18” oc, w/ punched holes for ribbed bars at 5” oc |
| Assembly: |
Notch each side of the ribbed bar at cross bars & pass the ribbed bars through the cross bars & rotate 90 degrees to lock the bars together. |
| Anchorage: |
Extend every 4th ribbed bar to the floor & anchor with a steel sleeve expansion anchored to the floor, anchor to walls with a 3x2x3/16” angle bolted to wall, & field weld |
| Finish: |
chemically degrease & 1 coat of rust inhibitive primer |
| Options: |
jail bar spacing 4” oc, flat bar spacing at 12” oc |
Custom Prison Equipment and Detention Products
Detention Windows
Bar Grille
Woven Rod
Perforated Plate
HVAC Grilles
and more!
Call us with your specifications
800-245-3172
|
