|
PSI has created a package pass thru to guarantee a high level
of security in passing items from one area of a detention facility to another.
Pass Thrus are an important piece of prison equipment that allow for the transfer
of weapons, evidence, and other valuable items from one location, through the
wall, to another location. The pass thru is appropriate and useful in all law
enforcement venues.
Contact us today for a quote on pass thrus and other detention equipment.
Pass Thru Doors: Specifications
The PSI package pass thru has a welded body formed from 10-gauge steel on the top, bottom, and sides. The doors, on each end, as well, are made from 10-gauge formed stainless steel. The pass through frame of 7-gauge steel is 2” wide, with four sides cut and notched at each corner. Post-installation field welding secures the pass through in position.
Pass thru doors are attached using concealed 16-gauge piano hinges. The doors on PSI's package pass thru is secured with two latches: a paddle latch on the secured side, and an internal latch to control the unsecured side. This guarantees that only one door will operate at a time. The pass thru is finished with a chemical degreaser, a rust-inhibitive primer, and a #4 finish on all the stainless steel doors
PSI also makes a pass thru hopper, or ( "pass hopper" ) - another device used to pass weapons and other valuable items from one area of a law enforcement center to another.
Click here for pass thru equipment for prison cafeterias.
PS-100
PACKAGE PASS THRU
| Door: |
10 ga formed stainless steel doors, each side |
| Body: |
10 ga steel top, bottom & sides
|
| Frame: |
2x7 ga steel frame, 4 sides, cut and notched at each at each corner to create a square corner, field weld after installation. |
| Latch: |
16 ga piano hinge, concealed under door
|
| Finish: |
Paddle latch on secured side, internal latch controls unsecured side so only one door will operate at a time.
All welded & ground construction
All welded & ground construction
Chemically degreased w/ 1 coat rust inhibitive primer, #4 finish on all stainless steel doors.
|
|
